In interior lighting design, want to use LED tube light to the ideal effect, cloth lamp this link is crucial, which involves one for LED tube light partition scatter cloth lamp, lighting effects to achieve ideal state.
In the details, see how science base cloth lamp correctly.
Partition scatter light, it is against the entire lighting space, according to different conditions in different areas of the interior, in the form of tube light dot light source lighting, interface to multiple layers of cloth lamp method.
Using this method, the light source to average distribution, makes the regional balance of the ground illumination, no shadow.
The graph below, a detailed look at how to use zoning scatter way of lighting for LED tube light cloth light: images from: China merchants bank chongqing branch sound floating photoelectric case above: 1, to local all bright, the distance between shell and tube light lamp d1 for how many appropriate?
2, according to the murals or wash wall, tube lamp and metope distance d2 within the scope of what?
3, the space is enough bright?
To answer this question, we need to know the beam Angle of lamps and lanterns, with 38 & deg;
The canister light beam Angle, for example, in the layer 2.
In 83 meters of space,
As shown in the bank office area height)
, the light hitting the ground domain is a circle diameter of about 2 meters (
Below diagram)
And, therefore, shell and tube light lamp spacing d1 (
The picture above)
Maximum of 2 meters, if change to 45 & deg;
The cone Angle of the light beam, the canister light distance d1 maximum of 2.
5 meters (
Canister light beam Angle is wider, cloth, the greater the distance between lamp
。
Moreover, according to the experience of the case, we are yellow race of brightness is greater than the actual need of numerical senses, this can reduce the lamp spacing to increase brightness, suggested interval 11.
5 meters to install a lamp.
On the other hand, tube lamp and metope distance d2 (
The picture above)
In 301250 px is appropriate,
If less than 750 px, usable wider beam Angle of tube light adjusting flare to remedy)
。
Finally, let's take a look at the whole space enough light.
See below, from the global perspective, partition scatter lighting is the focus of the light to average distribution in the form of point type illuminant, ensure the ground illumination standard, no shadow, bright space.
Pictures from: lighting sound floating photoelectric project of chongqing jiangbei international airport to note is that a lighting projects often covers different areas, each area of space division is different, some may because of the special condole top, storey height is low, some regional smallpox or higher;
Or each region application LED canister light beam width degree also has a different Angle.
Scatter to partition cloth lamp, therefore, be sure to combine the different situation of every space for planning, rather than with a cloth lamp solutions to deal with all the space.
Above motioned: even the same type, same canister light beam Angle, the height of the ground,
Apart from the ground can be seen as smallpox height is different)
Light field, playing to the ground diameter is different, so their size suitable for cloth lamp spacing is different!
Negative case: cloth lamp too close, the unpleasant case: positive density, moderate comfortable blockbuster auto 4 s shops sound floating photoelectric LED lighting engineering project as a whole, sound floating photoelectric advice do cloth lamp solutions to adapt to space conditions (
Such as different smallpox height, wall distance, etc. )
, combined with the
LED downlight lamps and lanterns of the Angle of beam width of spacing distribution, is one of the partition layout principles of scatter light.
So, everybody in figuring out the origins of each area, based on the data, using the method of inductive cloth lamp above, basic about
LED spotlights, lighting layout plan is out.
Floating introduction note floating photoelectric construction, focusing on the design, the production of lamps and lanterns of the airport, hotel, commercial, office and other LED lighting projects provide the overall solution, for the domestic 6 big airport designated supplier of lamps and lanterns.
Tel: 0755 -
86699010, 400 -
636 -
7788 contact address: nanshan district, shenzhen science and technology park changhong technology mansion 16 layer choose lamp web site: http://www.
yinfu100.
cn/
The use and installation of INFO CENTER is compared with most other systems for managing the outside led downlights effectively and no doubt INFO CENTER have won the race so many times.
Make your small led downlights ip65 led downlights. Invest in professional INFO CENTER services. For more info, check out Rayven Led Downlights.
INFO CENTER is attracting a great positive feedback from the customers. And many of our clients are fully satisfied with it.
