Track light classification and size and maintenance methods

track light as the name suggests is installed in the lamp on the tracks, it can be adjusted the irradiation Angle used in focus lighting places. As a kind of specific to shoot the light and track light usually use, general commercial, such as shopping malls, car display, jewelry, star hotel, brand clothing, upscale clubs, cultural relics exhibition hall, chain stores, brand business hall, professional focus lighting places such as Windows, counter. Small make up then introduce the size of the track light and maintenance methods.

3 w with the track light

generally for 5 lamp diameter. 2 cm, height of 16 cm, light 10 cm long, about 10 installation box. 3cm。

7 w with the track light

lamp holder in diameter of 7. 1 cm, 17 cm height is commonly, lamp 11 cm long, install the box of about 9. 7cm。

with the 12 w track light

lamp holder for 9 in diameter. 9 cm, height of 26 cm, light 18 cm long, install the box of about 9. 7cm。

18 w surface mounted track light

lamp holder in diameter is 11. 4 cm, height 27 cm, light long 17. 7 cm, installation box of about 9. 7cm。

the track light including paragraphs and suction a top track two. The suction a top rail access after the 220 v power supply bulb screws into the screw, the screw will be half exposed, the half is used for pinned to the wall. It has the advantage that you don't have to buy track can be directly installed on a fixed point and effort, of course, also save money. , of course, this kind of track light weakness is it adjustable Angle direction but not adjust the position. Install track though time-consuming fee money, but you can choose and place of the length of the track, so that we can move the track light.

two connected to the power supply voltage 220 v, the light is white, warm white, and three kinds of warm light, some warm light relatively soft and Bai Guangze hale and hearty, can choose according to his be fond of and use the warm light or white light. Can be used in household lighting ( The sitting room, TV setting wall, etc. ) , office lighting, commercial lighting, booth and exhibiting ark corridor background the back light tank, etc.

now on the market of track light mostly black and white and dichromatic, track bar is black and white and dichromatic accordingly, can choose according to individual be fond of. Say that finish, the size of the track light and use to say, we also have a is necessary is track light rail, now commonly used track is 1 m, 1. 5 m, 2 m length of the three, article orbit altitude in 20 cm, domestic outfit track light generally recommend use 1 m tracks, clothes and so on under booth or corridor long size of the orbit are recommended.

LED track light maintenance methods:

when using led downlights lamp do not frequently switch as far as possible, because the lamps and lanterns at the instant of the frequent start, through the filament current is greater than the normal work of electric current, the filament temperature rise sharply accelerated sublimation, which will greatly reduce its service life, so try to reduce the number of lamps and lanterns of LED track light switch. When cleaning maintenance should pay attention to don't change the structure of the lamps and lanterns, also don't replace the lamps and lanterns of inside some of the parts, at the end of the cleaning maintenance, should install lamps and lanterns is good according to the sample, don't packing, wrong parts of lamps and lanterns; According to the sign of source parameters in a timely manner to replace aging tubes, found on both ends of the lamp is red, black or dark, jump arranged not bright, should be timely replacement bulb, prevent unsafe phenomenon such as ballast burn out.

If you are sourcing for product development or manufacturing operations, you won't miss Foshan Rayven Lighting Co., Ltd's list of offer.
To reduce your production costs, get your and small led downlights from Foshan Rayven Lighting Co., Ltd,you will get high quality warranty at favorable price in return. Visit Rayven Led Downlights.
Using high-quality materials to produce INFO CENTER is one of the most important part during manufacturing.
We began investing in our workforce and negotiated deals with major suppliers and providers to lower the cost of equipment so the technicians could enhance the competitiveness of INFO CENTER right away.