What are the main components of LED panel light?
panel light aluminum frame:
is the main channel of the led heat dissipation, appearance is simple and easy, can use ZY0907, USES the low cost of die stamping mould, machining cost is low; Die-casting aluminum frame IP rating can be a little higher, the surface texture is good, the whole is beautiful, but early into the mold cost is higher.
the led light source:
usually use 3528 led lamp bead, also somebody USES 3014 and 5050. 3014 and 5050, the cost is low, slightly less, the key is the light dot design difficulty. 3528 high light efficiency good commonality.
LED light guide:
the side LED light refraction by branch make the light even derived from the front, is LED spotlights quality control key points of light guide plate. Network design is not good, see the whole light efficiency is very poor, usually appear on both sides of the middle bright dark, or into the light with the light take, or visible partial dark space, brightness again or a different Angle. To improve the photosynthetic efficiency of light guide plate depend mainly on the design of the network, the second is the quality of the plate, but it is not necessary to superstitious first-line brand of plank, qualified plate between the light transmittance usually. General small LED lights factory is directly buy public use of light guide plate, don't need to proofing design, more manufacturers use the male version usually quality qualification. LED diffuser plate
:
will light guide plate export evenly and can also play a role of fuzzy network. General use acrylic diffuser 2. 0 plate or PC material, almost is PS material, acrylic lower cost and light transmittance is higher than the PC is a bit high, acrylic brittle anti-aging performance is weak, the PC price a little expensive, but strong anti-aging performance. Diffuser in mount later can't see the site, and light transmittance to around 90%. Acrylic light transmittance at 92%, the PC was 88%, the PS is probably 80%, we can according to the requirements in terms of diffusion plate material choice, most manufacturers are using acrylic material.
reflective paper:
will guide plate on the back of the corner reflection out in order to improve the light efficiency, for RW250 commonly.
HouGaiBan:
main function is to seal the LED panel lights, generally use 1060 aluminum, still can make a cooling effect.
drive power supply:
there are two kinds of led drive power supply, one is to use a constant current power supply, the model of high efficiency, PF value up to 0. 95, cost-effective; The second is the use of constant pressure constant current power supply, stable performance, but low efficiency, high cost, the use of the general power supply is mainly exports, the other requires certification requirements, shall be used for safety of power supply. Actually family use constant current power supply is very safe, because users are hard to come into contact with the power supply, and the lamp body is safe to use by itself, low-voltage electrical.
installation accessories:
suspension wire and mounting bracket for mounting accessories.
from the point of view of quality control, in order to improve photosynthetic efficiency to spend additional money in the LED light source and LED light guide plate is one of the most effective, from the marketing point of view, to spend additional money in the aluminum frame cover plate to hang and so on can upgrade the product.
Foshan Rayven Lighting Co., Ltd is the largest manufacturer of INFO CENTER, which is one of the best product manufactured from us.
Foshan Rayven Lighting Co., Ltd assures you that you will be satisfied with its results and humbly request you to try this. We are hoping for a better business deal with you.
The more people who do a certain thing, the more likely others are to do it as well. When Rayven can demonstrate their popularity or satisfaction across a wide customer base, other consumers are more likely to buy in as well.
Foshan Rayven Lighting Co., Ltd provides the ideal conditions for business creation – access to cash, human capital and affordable office space, for instance – can help new ventures not only take off but also thrive.
The group's Quality Systems Manager (QSM) is responsible for ensuring that Foshan Rayven Lighting Co., Ltd has in place systems that guarantee quality throughout the Group.
